Ultrafast laser state active controlling based on anisotropic quasi-1D material.

Laser state active controlling is challenging under the influence of inherent loss and other nonlinear effects in ultrafast systems. Seeking an extension of degree of freedom in optical devices based on low-dimensional materials may be a way forward. Herein, the anisotropic quasi-one-dimensional layered material Ta2PdS6 was utilized as a saturable absorber to modulate the nonlinear parameters effectively in an ultrafast system by polarization-dependent absorption. The polarization-sensitive nonlinear optical response facilitates the Ta2PdS6-based mode-lock laser to sustain two types of laser states, i.e., conventional soliton and noise-like pulse. The laser state was switchable in the single fiber laser with a mechanism revealed by numerical simulation. Digital coding was further demonstrated in this platform by employing the laser as a codable light source. This work proposed an approach for ultrafast laser state active controlling with low-dimensional material, which offers a new avenue for constructing tunable on-fiber devices.

Phosphorus-doped fiber for flat octave spanning supercontinuum generation.

In a fiber supercontinuum (SC) source, the Raman scattering effect plays a significant role in extending the spectrum into a longer wavelength. Here, by using a phosphorus-doped fiber with a broad Raman gain spectrum as the nonlinear medium, we demonstrate flat SC generation spanning from 850 to 2150 nm. Within the wavelength range of 1.1-2.0 µm, the spectral power density fluctuation is less than 7 dB. Compared to a similar SC source based on a germanium-doped fiber with narrower Raman gain spectrum, the wavelength span is 300 nm broader, and the spectral power density fluctuation is 5 dB lower. This work demonstrates the phosphorus-doped fiber's great advantage in spectrally flat SC generation, which is of great significance in many applications such as optical coherence tomography, absorption spectroscopy, and telecommunication.

Influence of wavelength, linewidth, and temperature on second harmonic generation of a superfluorescent fiber source.

Low-coherence tunable visible light sources have a wide range of applications in imaging, spectroscopy, medicine, and so on. Second harmonic generation (SHG) based on a superfluorescent fiber source (SFS) can produce high-brightness visible light while retaining most of the characteristics of superfluorescent sources, such as low coherence, low intensity noise and flexible tunability. However, due to the limitations in phase matching conditions, SHG based on SFS is difficult to reach an equilibrium between high efficiency and robustness of phase matching to temperature variation. In this paper, based on a spectral tunable SFS, we provide a comprehensive analysis, both experimental and theoretical, of the impact of wavelength, linewidth, and temperature on the output performance of SHG. Our findings indicate that broader linewidths adversely affect conversion efficiency, yet they enhance the capacity to withstand temperature variations and central wavelength detuning, which is an advantage that traditional SHG methods do not possess. This work may pave the way for utilizing low-coherence visible light in domains and extreme environments where robust output stability becomes imperative.

High power tunable Raman fiber laser at 1.2 µm waveband.

Development of a high power fiber laser at special waveband, which is difficult to achieve by conventional rare-earth-doped fibers, is a significant challenge. One of the most common methods for achieving lasing at special wavelength is Raman conversion. Phosphorus-doped fiber (PDF), due to the phosphorus-related large frequency shift Raman peak at 40 THz, is a great choice for large frequency shift Raman conversion. Here, by adopting 150 m large mode area triple-clad PDF as Raman gain medium, and a novel wavelength-selective feedback mechanism to suppress the silica-related Raman emission, we build a high power cladding-pumped Raman fiber laser at 1.2 µm waveband. A Raman signal with power up to 735.8 W at 1252.7 nm is obtained. To the best of our knowledge, this is the highest output power ever reported for fiber lasers at 1.2 µm waveband. Moreover, by tuning the wavelength of the pump source, a tunable Raman output of more than 450 W over a wavelength range of 1240.6-1252.7 nm is demonstrated. This work proves PDF's advantage in high power large frequency shift Raman conversion with a cladding pump scheme, thus providing a good solution for a high power laser source at special waveband.

Monolithic tapered Yb-doped fiber chirped pulse amplifier delivering 126 µJ and 207 MW femtosecond laser with near diffraction-limited beam quality.

In this work, a high-energy and high peak power chirped pulse amplification system with near diffraction-limited beam quality based on tapered confined-doped fiber (TCF) is experimentally demonstrated. The TCF has a core numerical aperture of 0.07 with core/cladding diameter of 35/250 µm at the thin end and 56/400 µm at the thick end. With a backward-pumping configuration, a maximum single pulse energy of 177.9 µJ at a repetition rate of 504 kHz is realized, corresponding to an average power of 89.7 W. Through partially compensating for the accumulated nonlinear phase during the amplification process via adjusting the high order dispersion of the stretching chirped fiber Bragg grating, the duration of the amplified pulse is compressed to 401 fs with a pulse energy of 126.3 µJ and a peak power of 207 MW, which to the best of our knowledge represents the highest peak power ever reported from a monolithic ultrafast fiber laser. At the highest energy, the polarization extinction ratio and the M2 factor were respectively measured to be ~ 19 dB and 1.20. In addition, the corresponding intensity noise properties as well as the short- and long-term stability were also examined, verifying a stable operation of the system. It is believed that the demonstrated laser source could find important applications in, for example, advanced manufacturing and photomedicine.

Broadband tunable Raman fiber laser with monochromatic pump.

Raman fiber laser (RFL) has been widely adopted in astronomy, optical sensing, imaging, and communication due to its unique advantages of flexible wavelength and broadband gain spectrum. Conventional RFLs are generally based on silica fiber. Here, we demonstrate that the phosphosilicate fiber has a broader Raman gain spectrum as compared to the common silica fiber, making it a better choice for broadband Raman conversion. By using the phosphosilicate fiber as gain medium, we propose and build a tunable RFL, and compare its operation bandwidth with a silica fiber-based RFL. The silica fiber-based RFL can operate within the Raman shift range of 4.9 THz (9.8-14.7 THz), whereas in the phosphosilicate fiber-based RFL, efficient lasing is achieved over the Raman shift range of 13.7 THz (3.5-17.2 THz). The operation bandwidths of the two RFLs are also calculated theoretically. The simulation results agree well with experimental data, where the operation bandwidth of the phosphosilicate fiber-based RFL is more than twice of that of the silica fiber-based RFL. This work reveals the phosphosilicate fiber's unique advantage in broadband Raman conversion, which has great potential in increasing the reach and capacity of optical communication systems.

Mitigation of TMI in an 8†kW tandem pumped fiber amplifier enabled by inter-mode gain competition mechanism through bending control.

In this work, the impact of fiber bending and mode content on transverse mode instability (TMI) is investigated. Based on a modified stimulated thermal Rayleigh scattering (STRS) model considering the gain competition between transverse modes, we theoretically detailed the TMI threshold under various mode content and bending conditions in few-mode fibers. Our theoretical calculations demonstrate that larger bending diameters increase the high order mode (HOM) components in the amplifier, which in turn reduces the frequency-shifted Stokes LP11o mode due to the inter-mode gain competition mechanism, thus improving the TMI threshold of few-mode amplifiers. The experimental results agree with the simulation. Finally, by optimizing the bending, an 8.38 kW output tandem pumped fiber amplifier is obtained with a beam quality M2 of 1.8. Both TMI and stimulated Raman scattering (SRS) are well suppressed at the maximum power. This work provides a comprehensive analysis of the TMI in few-mode amplifiers and offers a practical method to realize high-power high-brightness fiber lasers.

Analytical study on the steady-state thermal blooming effect of high-power ytterbium-doped fiber lasers propagating through the atmosphere.

Thermal blooming effect is one of the significant factors affecting the propagation performance of high-power ytterbium-doped fiber lasers (YDFLs) in the atmosphere. In this paper, two 20 kW YDFL systems with typical wavelengths (1070 nm and 1080 nm) are fabricated for propagation comparison experiments, which are used to investigate the thermal blooming effect induced by high-power YDFL propagation through the atmosphere. Under approximately the same laser system parameters (except wavelength) and atmospheric environment, the 1070 nm laser has better propagation characteristics than the 1080 nm laser. Due to the combined effect between the different central wavelengths of the two fiber lasers and the spectral broadening caused by output power scaling, the thermal blooming caused by the different absorptivity of water vapor molecules to the two fiber lasers is the main factor for the variation of the propagation properties. Through theoretical analysis and numerical calculation of factors affecting the thermal blooming effect, and considering the industrial manufacturing difficulty of YDFLs, a reasonable selection of fiber laser parameters can effectively improve atmospheric propagation performance and reduce manufacturing costs.

M2 factor estimation in few-mode fibers based on a shallow neural network.

A high-accuracy, high-speed, and low-cost M2 factor estimation method for few-mode fibers based on a shallow neural network is presented in this work. Benefiting from the dimensionality reduction technique, which transforms the two-dimension near-field image into a one-dimension vector, a neural network with only two hidden layers can estimate the M2 factor directly. In the simulation, the mean estimation error is smaller than 3% even when the mode number increases to 10. The estimation time of 10000 simulation test samples is around 0.16s, which indicates a high potential for real-time applications. The experiment results of 50 samples from the 3-mode fiber have a mean estimation error of 0.86%. The strategies involved in this method can be easily extended to other applications related to laser characterization.

Bidirectional tandem-pumped high-brightness 6†kW level narrow-linewidth confined-doped fiber amplifier exploiting the side-coupled technique.

In this work, a bidirectional tandem-pumped high-power narrow-linewidth confined-doped ytterbium fiber amplifier is demonstrated based on side-coupled combiners. Benefiting from the large-mode-area design of the confined-doped fiber, the nonlinear effects, including stimulated Raman (SRS) and stimulated Brillouin scattering (SBS), are effectively suppressed. While the transverse mode instability (TMI) effect is also mitigated through the combination of confined-doped fiber design and the bidirectional tandem pumping scheme. As a result, narrow-linewidth fiber laser with 5.96 kW output power is obtained, the slope efficiency and the 3-dB linewidth of which are ∼81.7% and 0.42 nm, respectively. The beam quality is well maintained during the power scaling process, being around M2 = 1.6 before the TMI occurs, and is well kept (M2 = 2.0 at 5.96 kW) even after the onset of TMI. No SRS or SBS is observed at the maximum output power, and the signal-to-noise ratio reaches as high as ∼61.4 dB. To the best of our knowledge, this is the record power ever reported in narrow-linewidth fiber lasers. This work could provide a good reference for realizing high-power high-brightness narrow-linewidth fiber lasers.

More than 6 kW near single-mode fiber amplifier based on a bidirectional tandem pumping scheme.

We demonstrate the first all-fiber monolithic bidirectional tandem pumping amplifier, to the best of our knowledge, based on a 30/250 µm conventional ytterbium-doped double-clad fiber. By optimizing the bidirectional pumping power distribution, an output power of 6.22 kW is obtained with near single-mode beam quality (M2=1.53), and no transverse mode instability is observed. This work could provide an excellent reference for high-power, higher-brightness fiber lasers.

Comprehensive investigations on the tandem pumping scheme employing the pump fiber laser operating at an extremely short wavelength.

In this work, with the aim of improving the nonlinearity threshold in tandem-pumped fiber amplifiers for higher output power, theoretical and experimental work was carried out to enhance the pump absorption and thereby decrease the required length of ytterbium-doped fiber by employing shorter-wavelength fiber lasers as the pump sources. Systematical simulations were first carried out to optimize the cavity parameters of a short-wavelength fiber oscillator at 1007 nm, and subsequently, the performance of the 1007 nm fiber laser in tandem pumping was simulated and compared with that of the 1018 nm fiber laser pumped results. Considerable absorption increment and efficiency improvement could be realized in the 1007 nm fiber laser pumped fiber amplifier relative to the 1018 nm fiber laser pumped one. Furthermore, according to the simulation results, a fiber laser operating at 1007.7 nm with the output power of ∼170 W and a slope efficiency of ∼72.90% was experimentally demonstrated. By applying this fiber laser in tandem pumping a 1080 nm fiber amplifier with different gain fiber lengths, improved performance was acquired in comparison with the 1018.6 nm tandem pumping scheme, the experimental results of which were coherent with the simulation results. This work could provide an effective approach for improving the nonlinearity threshold of tandem-pumped fiber amplifiers and paving the way for higher output power.

High-power tandem-pumped fiber amplifier with beam quality maintenance enabled by the confined-doped fiber.

The high absorption confined-doped ytterbium fiber with 40/250 µm core/inner-cladding diameter is proposed and fabricated, where the relative doping ratio of 0.75 is selected according to the simulation analysis. By employing this fiber in a tandem-pumped fiber amplifier, an output power of 6.2 kW with an optical-to-optical efficiency of ∼82.22% is realized. Benefiting from the large-mode-area confined-doped fiber design, the beam quality of the output laser is well maintained during the power scaling process with the beam quality factor of ∼1.7 of the seed laser to ∼ 1.89 at the output power of 5.07 kW, and the signal-to-noise ratio of the output spectrum reaches ∼40 dB under the maximum output power. In the fiber amplifier based on the 40/250 µm fully-doped ytterbium fiber, the beam quality factor constantly degrades with the increasing output power, reaching 2.56 at 2.45 kW. Moreover, the transverse mode instability threshold of the confined-doped fiber amplifier is ∼4.74 kW, which is improved by ∼170% compared with its fully-doped fiber amplifier counterpart.

Seeing the beam cleanup effect in a high-power graded-index-fiber Raman amplifier based on mode decomposition.

Due to the beam cleanup effect, brightness enhancement (BE) can be achieved in a Raman fiber amplifier (RFA) based on multimode (MM) graded-index (GRIN) fiber. In this Letter, a novel, to the best of our knowledge, diagnostic tool of mode decomposition (MD) based on a stochastic parallel gradient descent algorithm is demonstrated to observe the beam cleanup effect in a GRIN-fiber-based RFA for the first time, to our knowledge. During output power boosting up to 405 W at 1130 nm, the output beam quality factor M2 improves from 3.45 to 2.88, with a BE factor of 10.5. The MD results based on the near-field beam profiles from RFA indicate that the modal weight of the fundamental mode increases from 74.5% to 87%, confirming that the fundamental mode dominates with higher Raman gain. Moreover, the beam quality is found to be limited by the existence of a higher-order (Laguerre-Gaussian) LG10 mode, which is insensitive to the beam cleanup effect. The correlation coefficient reaches over 0.98 for all MD results. Thus, the accuracy of the MD method is high enough to provide further valuable insight into the physics of spatiotemporal beam dynamics in MM GRIN fiber.

Kilowatt level Raman amplifier based on 100 µm core diameter multimode GRIN fiber with M2 = 1.6.

In this Letter, we demonstrate a high-power Raman fiber amplifier with excellent beam quality based on graded-index fiber. The Yb-doped fiber laser (YDFL) and bandwidth-tunable amplified spontaneous emission (ASE) source are employed as the pump source to compare the laser performance separately. When the ASE with a bandwidth of 8 nm is employed, a maximum power of 943 W at 1130 nm is achieved, which is twice that pumped by YDFL. The beam quality factor M2 at maximum output power is 1.6, with a brightness enhancement (BE) factor of 27. To the best of our knowledge, this is the best beam quality and BE factor based on pure Raman gain with output power of over 100 W.

Over 400 W graded-index fiber Raman laser with brightness enhancement.

The power scaling on all-fiberized Raman fiber oscillator with brightness enhancement (BE) based on multimode graded-index (GRIN) fiber is demonstrated. Thanks to beam cleanup of GRIN fiber itself and single-mode selection properties of the fiber Bragg gratings inscribed in the center of GRIN fiber, the efficient BE is realized. For the laser cavity with single OC FBG, continuous-wave power of 334 W with an M2 value of 2.8 and BE value of 5.6 were obtained at a wavelength of 1120 nm with an optical-to-optical efficiency of 49.6%. Furthermore, the cavity reflectivity is increased by employing two OC FBGs to scale the output power up to 443 W, while the corresponding M2 is 3.5 with BE of 4.2. To our best knowledge, it is the highest power in Raman oscillator based on GRIN fiber.

Hundred-watt-level phosphosilicate Raman fiber laser with less than 1% quantum defect.

Quantum defect (QD)-induced high thermal load in high-power fiber lasers can largely affect the conversion efficiency, pose a threat to the system security, and even prohibit the further power scaling. In this Letter, we investigate evolutions and influences of the reflectivity of the output coupler, the length of phosphosilicate fiber, and the pump bandwidth, and demonstrate a hundred-watt-level low-QD Raman fiber laser (RFL). The RFL enabled by the boson peak of phosphosilicate fiber achieves a maximum power of 100.9 W with a reduced QD down to 0.97%; the corresponding conversion efficiency reaches 69.8%. This Letter may offer not only an alternative scheme for a high-power, high-efficiency fiber laser, but also great potential on the suppression of thermal-induced effects such as thermal mode instability and the thermal lens effect.

Brightness enhancement in random Raman fiber laser based on a graded-index fiber with high-power multimode pumping.

A brightness-enhanced random Raman fiber laser (RRFL) with maximum power of 306 W at 1120 nm is demonstrated. A half-open cavity is built based on a graded-index (GRIN) passive fiber and single high-reflective fiber Bragg grating written in it directly. Due to the beam cleanup effect in the GRIN fiber enhanced in the half-open RRFL cavity, the output beam quality factor M2 is improved from 9.15 (pump) to 1.76-2.35 (Stokes) depending on power, while the pump-Stokes brightness enhancement (BE) factor increases proportionally to output power reaching 6.1 at maximum. To the best of our knowledge, this is the highest power GRIN RRFL with BE.

Power scaling of Raman fiber amplifier based on the optimization of temporal and spectral characteristics.

We comprehensively study the effects of temporal and spectral optimization on single-mode Raman fiber amplifiers. Amplified spontaneous emission sources and ytterbium-doped fiber lasers are employed as seed or pump lasers for comparison, and passive fibers are utilized as gain media. The influences of various parameters of the laser on 2nd order Raman threshold and maximum output power are investigated experimentally, including bandwidth, seed power, wavelength separation between pump and seed laser, and temporal stability. With the 190 m passive fiber, the output power increases from 99.5 W to 142.4 W, corresponding to 43.1% improvement through the optimization of seed laser power, pump wavelength and temporal performance of pump source in this amplifier, which has guidance on the establishment of high-power single-mode Raman fiber amplifiers.

High-power cladding pumped Raman fiber amplifier with a record beam quality.

In this Letter, a high-power, high-brightness all-fiberized Raman amplifier based on a cladding-pumping scheme is presented for the first time, to the best of our knowledge. The triple-clad passive fiber is employed as Raman gain fiber in the laser system. The maximum output power is 762.6 W emitting at 1130 nm. To the best of our knowledge, this is the highest power in the fields of cladding-pumped Raman amplifiers. Through a cladding-pumping process, the beam quality parameter ${{\rm M}^2}$M2 improves from 6.12 of seed laser to 2.24 at maximum output power of 762.6 W, while the best ${{\rm M}^2}$M2 is 1.9 at 267.2 W. It is also the best beam quality of Raman laser with brightness enhancement in any kind of configuration (graded-index fiber or multi-clad fiber, laser or amplifier, all-fiber or free-space configuration) with power of over 100 W.